Detailed Product Description

Automatic tire inflator

Technical Data Summary

Dimensions(Height* Width* Depth)   290mm*230mm*120mm

                                                    11.4''*9.1''*4.7''

Net Weight                                    4kg/8.8lbs

Gross Weight                                6.5kg/14.3lbs

Packing Size(Height* Width* Depth)170mm*500mm*290mm

                                                    6.7''*19.7''*11.4''

Power Requirement                        100-240Vac  50 / 60HZ

Power Consumption                       10VA

Operating Temperature Range        -20/-4°F to 70 / 158°F

Max Inlet Air/Nitrogen Supply          145PSI / 10bar / 1000kPa

Operating Range                            5-102PSI/0.3-7bar/35-700kPa

Over Pressure Setting Range          0-29PSI/0-2.0bar/0-200kPa

Accuracy                                      ±1PSI/0.07bar/7kPa

Resolution                                     1PSI/0.1bar/5kPa

Units of Measurement                     PSI/bar/kPa

Specifications:

1. Adjustable over pressure setting(OPS)

2. Auto-Start inflation

3. Automatic zero drift adjustment

4. Remain at last setting

5. Comprehensive diagnostics and error reporting

6. Audible and visual end of the cycle signal indicators

7. Large backlight LCD display

8. Vandal resistant mechanical switches

9. Suits Standard nitrogen bottle/Direct nitrogen supply from generator/Air compressor

10. 1 No.*10M/32.8ft standard hose with single clip-on open type chuck

11. 1400mm/55.1 grey mounting steel stand base Supplied separately

Detail Description of  OPS:

Over Pressure Setting(OPS)

When fitted,the bead of the new tyre must be seated on the wheel rim.This is done via inflating the tyre past the required pressure until the bead is in place.The pressure needs to then be reduced to the required pressure.Traditionally this is done manually and is therefore time consuming for the operator.The OPS function allows the operator to set the amount of over pressure between 0 and 2 bar/29psi/200kPa.The unit will then over inflate the tyre by the set amount before automatically deflating back to the final pressure required.