Detailed Product Description

Tire inflator

Technical Data Summary

Dimensions(Height*Width*Depth)  1400mm*500mm*600mm

                                                  55.1"*19.7"*23.6"

Net Weight                                 26.7kg/58.7lbs

Gross Weight                             38kg/83.8lbs

Packing size((Height*Width*Depth)  310mm*1420mm*510mm

                                                   12.2"*55.9"*20.1"

Power Requirement                       24Vdc(2 pcs 12Vdc internal batteries included)

                                                   100-240Vac 50 /60HZ charger included

Power Consumption                       23VA

Operating Temperature Range       -20/-4°F to 70 / 158°F

Max Inlet Air Supply                     174PSI / 12bar / 1200kPa

Operating Range                           5-174PSI/0.3-12bar/35-1200kPa

Over Pressure Setting Range         0-29PSI/0-2.0bar/0-200kPa

Accuracy                                    ±1PSI/0.07bar/7kPa

Resolution                                   1PSI/0.1bar/5kPa

Units of Measurement                   PSI/bar/kPa

Specifications:

1. Adjustable over pressure setting(OPS)

2. 6 air outlets allow simultaneous inflation of up to 6 tires

3. Auto-Start inflation

4. Automatic zero drift adjustment

5. Remain at last setting

6. Comprehensive diagnostics and error reporting

7. Audible and visual end of the cycle signal indicators

8. Large backlight LCD display

9. Vandal resistant mechanical switches

10. Suits Air compressor

11. 4 Nos.*8M/26ft standard hoses with single clip-on closed chuck

12. Long life design, up to 2 days of average usage before recharge

Detail Description of  OPS:

Over Pressure Setting(OPS)

When fitted,the bead of the new tyre must be seated on the wheel rim.This is done via inflating the tyre past the required pressure until the bead is in place.The pressure needs to then be reduced to the required pressure.Traditionally this is done manually and is therefore time consuming for the operator.The OPS function allows the operator to set the amount of over pressure between 0 and 2 bar/29psi/200kPa.The unit will then over inflate the tyre by the set amount before automatically deflating back to the final pressure required.